LH Stinger Bed Kit — the polyimide heater and the shrink-wrapped carbon fiber bed and carriage platesLH Stinger Bed Kit — the polyimide heater and the shrink-wrapped carbon fiber bed and carriage plates
LH Stinger Bed Kit laid out — carriage plate with spacers and strain-relief arms, polyimide heater, 200 mm bed plate, second carriage plateLH Stinger Bed Kit laid out — carriage plate with spacers and strain-relief arms, polyimide heater, 200 mm bed plate, second carriage plate
LH Stinger 200 mm carbon fiber bed plate, 3 mm matte 3K weave with four countersunk mounting holes — the print surfaceLH Stinger 200 mm carbon fiber bed plate, 3 mm matte 3K weave with four countersunk mounting holes — the print surface
LH Stinger 200 mm polyimide flex-PCB bed heater on the bench with the pre-soldered red power leads and strain-relief bootLH Stinger 200 mm polyimide flex-PCB bed heater on the bench with the pre-soldered red power leads and strain-relief boot
LH Stinger Bed Kit — the polyimide heater and the shrink-wrapped carbon fiber bed and carriage plates
LH Stinger Bed Kit laid out — carriage plate with spacers and strain-relief arms, polyimide heater, 200 mm bed plate, second carriage plate
LH Stinger 200 mm carbon fiber bed plate, 3 mm matte 3K weave with four countersunk mounting holes — the print surface
LH Stinger 200 mm polyimide flex-PCB bed heater on the bench with the pre-soldered red power leads and strain-relief boot

dfh.fm

LH Stinger Bed Kit — Carbon Fiber Bed + Carriage Plates + 24V Polyimide Heater

$72.99
Shipping calculated at checkout.

The whole LH Stinger 200 mm bed stack in one order: the carbon fiber bed plate, both carriage plates and the polyimide heater that bonds underneath. Everything the Starter Kit ships for the bed — for a scratch build from the BOM, a re-bed or a spare.

What's in the kit

How it goes together

  • Epoxy the two carriage plates into one (Loctite Power Epoxy Universal or J-B Weld High Heat), file the belt holes smooth and keep the round spacers and strain-relief arms from the breakaway tabs.
  • Bond the heater to the underside of the plate on the project's alignment jig and let the adhesive cure before the first heat-up.
  • Print straight on the carbon; a PEI film is optional — the 192 mm cut of our 20mil Ultem PEI sheet fits.

Gotchas

  • No magnet, no spring steel in a Stinger bed stack — the carbon plate is the print surface.
  • Carbon conducts: insulate the heater leads, short-test before power, and keep the bed at or under the project's 110°C limit.
  • Not included: bed thermistor (a glass bead goes through the heater's round opening), XT60 connectors (XT60 pair), epoxy and fasteners.
  • Same parts, same shelf as the singles linked above — if the kit reads sold out, one of its parts is.
Shipping & Returns

Returns:

Thank you for purchasing from dfh.fm. I want you to be completely satisfied with your purchase. If for any reason you are not satisfied, you may return your purchase within the windows below.

Defective items: Please inspect items upon receipt. If you receive a defective item, you may return it for a full refund or replacement within 90 days of the original purchase date. Please contact me to initiate a return for a defective item.

Non-defective items: If you are not satisfied with a non-defective item, you may return it for a refund within 30 days of the original purchase date. A 20% restocking fee will be deducted from the refund amount, to offset the time and inconvenience, as I am the sole employee processing the return and restocking the item. The fee also covers the costs associated with processing the return. Refunds for non-defective items will be issued through the original payment method.

Preordered items: Due to the nature of preorders, delivery dates are subject to change. Please keep in mind that, If you have preordered an item, it is not eligible for a refund until after it has arrived at the store. Once the item arrives at the store and is inspected, you may request a refund within 30 days of the original purchase date. Please note that refunds for preordered items may take up to 10 days to be issued.

To initiate a return, please email support@dfh.fm with your order number and the reason for the return. We will provide you with further instructions on how to return your purchase.

Thank you for shopping with us. If you have any questions or concerns, please don't hesitate to contact me at support@dfh.fm.

Order alterations and cancellations:

Once an order has been submitted, no alterations can be made. This includes adding or removing items or canceling orders. You are welcome to return an order, once you have taken receipt, following the returns procedure listed above.

Shipping:

US Shipping is via UPS or USPS. The way it is set up shows the least expensive options for standard, priority and express shipping. I can not take special requests for specific carriers at this time.

International shipping is mostly UPS, as I utilize Zonos/UPS integration to tally extremely accurate import and shipping costs.

I require a telephone and email with international orders and you must make yourself available to the carrier or your customs, should they require more information. If you are unreachable and the package is discarded or returned, I will not be responsible for returning your shipping cost.

If there is a problem with an international order, it is my choice to refund part or all of the order, or send a replacement.

Addresses are verified through Shopify, but the customer is still responsible for inputting their address in the correct format. Any returns or lost shipments, due to incorrectly addressed packages, are the responsibility of the customer.